CAWS waterproofs basements, lift pits, retaining walls and below ground rooms across Perth, working from the inside when the outside face can’t be reached. We use Xypex crystalline waterproofing on concrete and brickwork, and pressure injection for leaking cracks.
Ground water presses against the walls and slab. If the original membrane on the outside has failed, was never installed, or a crack has opened up, water finds its way through. Most Perth basements are built hard up against a boundary, so digging out the outside face usually isn’t an option.
Fixing a leak from the side the water comes from is always our first choice. When that face is buried or built to a boundary, we treat the wall from the inside instead.
The best fix is on the side the water comes from. When that face is buried or out of reach, we work from the inside.
Fixing a leak from the side the water comes from is always the better option, and it's our first choice. When that face can't be reached, crystalline waterproofing such as Xypex is applied to the inside. It reacts with moisture and the concrete to grow insoluble crystals in the pores and fine static cracks, holding water back even under pressure. On brickwork it's applied as a crystalline render, built up in layers. The crystals take around a month to fully develop, and moving cracks still need injection or a flexible joint.

Moving cracks and active leaks need more than a coating. We pressure inject them first: water reactive polyurethane stops the flow, usually followed by a flexible resin for a permanent seal.
A filled crack looks fixed from above. What matters is what happens underneath.
Surface patching covers the top of the crack. The crack stays open underneath, so movement reopens the patch and water keeps tracking through.
Pressure injection pumps resin through ports drilled into the crack, filling it through its full depth. Epoxy resin bonds dry, non-moving cracks back together. For leaking cracks, water-reactive polyurethane stops the flow, usually followed by a flexible resin for a permanent seal.



Yes. Crystalline waterproofing such as Xypex is designed for the inside face of concrete and brickwork when the outside can’t be reached.
Yes. On brickwork it goes on as a crystalline render, built up in layers.
The crystals keep developing for around a month after application.
Active leaks and moving cracks are injected first, then the wall is treated.
Yes, along with basement car parks, plant rooms and below ground rooms.