Flaking paint, crumbling render and a white tide mark along the bottom of your walls usually means water and salt are rising through the brickwork. CAWS finds the cause first, injects a new damp course where the old one has failed, and replaces the salt damaged render so the wall stays dry.
Typical rising damp on an internal wall
Signs of rising damp
A stained band or tide mark low on the wall that comes back after painting
Paint bubbling, blistering or flaking along the lower part of the wall
White, fluffy salt crystals on brick or render
Render and mortar crumbling or turning to powder
Swollen or rotting skirting boards and a musty smell in rooms that never dry out
What is happening inside the wall
Brick and mortar soak up ground moisture like a wick. Houses are built with a damp course low in the wall to stop it, but older damp courses break down. Once water gets past, it carries salt up with it. The water evaporates, the salt stays behind, and the wall slowly breaks apart from the inside.
Before: the old damp course has failed and moisture rises into the wall. After: a new damp course is injected into the mortar bed and the wall is rendered with a waterproofing render.
Why older Perth homes are prone to it
Many older Perth homes are double brick or solid masonry, built with damp courses of slate, bitumen or early membranes that have now reached the end of their life. Over the years garden beds get built up, paths are laid higher and render is run down to the ground, and any of these can bridge an old damp course that may still be working. That is why we look at the outside of the wall as well as the inside.
Is it really rising damp?
Plenty of walls blamed on rising damp are wet for another reason, and treating the wrong problem wastes money. We look at the whole wall and what is around it before we recommend anything, and we don’t charge for inspections.
Garden beds and paving built up too high. Soil or pavers above the damp course let water bypass it completely.
Leaking pipes, showers or downpipes. A slow leak inside or beside the wall can look exactly like rising damp.
Reticulation hitting the wall. Sprinklers soaking the same spot every day keep the brickwork wet.
A bridged damp course. Render run down over the damp course gives water a path around it.
Rising damp, penetrating damp or condensation?
Rising damp. Starts at floor level and usually stays within the first metre or so. It leaves a tide mark and salt, and is worst on walls in contact with the ground.
Penetrating damp. Water getting in from the side or above, such as a leaking gutter, cracked render, failed window seals or a leaking balcony overhead. Patches can appear at any height and grow after rain.
Condensation. Moisture from inside the home settling on cold walls, usually in bathrooms, laundries and bedrooms. It shows as mould and black spotting in corners and behind furniture, without a salt tide mark.
How we fix rising damp
Find the cause. We check ground levels, garden beds, pipes, reticulation and the existing damp course.
Remove the bridges. Garden beds and paving are lowered where needed and leaks are fixed.
Inject a new damp course. A row of holes is drilled along the mortar bed just above ground level and damp proofing cream is injected into each one. It spreads through the mortar and cures into a continuous water repellent barrier.
Remove salt damaged render. Render full of salt keeps drawing moisture, so it comes off back to sound brickwork.
Waterproofing render and finish. A crystalline waterproofing render goes on in layers, then the wall is rendered and ready for paint.
Injecting a new damp course into the mortar bedThe same kind of wall once repaired and painted
What our free inspection covers
Where the damp is showing, how high it rises and whether salt is present
Ground levels, garden beds, paving and drainage against the wall
Downpipes, plumbing, showers and reticulation near the affected area
The condition of the existing damp course, render and mortar
A written scope and quote, with the cause explained in plain English
Homes, strata and basements
Older brick homes. Double brick and solid masonry homes where the original damp course has broken down.
Strata buildings. Ground floor units and common areas, with a clear report and scope for the strata manager and owners.
Basements and retaining walls. Walls with soil against them, where we waterproof from the inside when the outside can’t be reached. Read more about basement waterproofing from the inside.
Common questions
What is damp course injection?
A row of holes is drilled into the mortar bed just above ground level and a damp proofing cream is injected into each one. It spreads through the mortar and cures into a continuous water repellent layer, doing the job the original damp course was meant to do.
Can I just paint over rising damp?
Not for long. The water and salt keep coming through and the new paint flakes off again, usually within a season or two. The cause needs fixing first.
Will a dehumidifier fix rising damp?
It can make a room feel drier, but it doesn’t stop water moving up through the wall or the salt damaging the render.
How long before I can paint?
It depends on how wet the wall was and the render system used. We will tell you when the wall is ready, because painting too early traps moisture.
Will it come back?
Not if the cause is fixed. That is why we spend the time on diagnosis, and why we will tell you if a garden bed or a leaking pipe needs sorting as part of the job.
How much does it cost?
It depends on the length of wall affected and what is causing it. Inspections are free and you get a written scope and quote.