CAWS lays decorative flake floors on garages, alfrescos and balconies across Perth. We are a concrete repair, protection and waterproofing business first, so your floor is laid by people who understand the whole slab, not just the coating that goes on top.
Try every Q-Coat flake and stone blend across a full floor in three quick steps.
AlpinePrestige Flake
1Choose your garage
2Choose a finish
3Hover over a colour to see it on the floor
Please note: this preview is a guide onlyThe garages are illustrations and the colours come from the supplier's own sample photos. Flake size and spread, the base coat colour, the topcoat sheen, lighting and your slab all change how a blend looks in place, and screens show colour differently. Please confirm your choice against a physical sample on site before work begins.
Many flake floors are laid by crews trained to do one job: grind, roll and flake. That works on a perfect slab, but most slabs are not perfect. Cracks, moisture, old coatings, contamination and movement joints all affect how a coating performs, and missing them is why so many floors peel, bubble or crack within a few years.
Our team has more than 130 years of combined experience in concrete repair, protection, coatings and waterproofing on homes, strata buildings and commercial sites. We read the slab before we coat it, repair what needs repairing, and choose a system to suit the conditions, so the finish lasts.
We understand the concrete underneath. Crack repair, spalling and concrete cancer are our everyday work, not an extra we send out to someone else.
We understand moisture. As waterproofing specialists, we know how water moves through a slab and how to deal with it before it lifts a coating.
We understand coatings. From membranes to protective and decorative systems, we choose the primer, base coat and topcoat to suit the job, rather than one product for every floor.
One team, start to finish. The people who assess your slab are the same people who repair and coat it.
Where we lay flake floors
Garages. Hard wearing, resists oil and stains, and turns a tired garage into part of the house.
Alfrescos and patios. A stone look finish that hides dust and wears well, with a slip resistant option for outdoor areas.
Balconies. Laid over a proper waterproofing membrane, so it looks good and keeps water out of the slab. Read more about leaking balcony repair.
Commercial alfrescos and podiums. Decorative flake waterproofing membranes over large areas for builders, developers and strata, in the same colour range. You can preview the colours on a balcony, alfresco or podium.
Workshops and strata common areas. Sheds, workshops, showrooms, bin stores and walkways.
Why so many flake floors fail
The flake is the easy part. Most failures come from what is underneath it, and we see the same problems again and again on floors other people have coated.
Peeling and lifting. Coating rolled over a slab that was only washed, not ground. It looks good for a year, then lets go.
Hot tyre marks. Thin coats soften under hot tyres and lift where the car parks.
Cracks coming through. Cracks painted over instead of repaired show through the new floor within months.
Bubbling. Moisture pushing up through the slab lifts the coating. We check the slab before we quote.
What goes into our flake floors
Every floor is built up in layers, and each one is done properly before the next goes on.
Cross section of a CAWS flake floor. Layers are indicative; your quote spells out the exact system for your slab.
Flake, stone look or plain epoxy?
Full flake. Bold and textured, and the best at hiding dust, dirt and small marks. The most popular choice for garages.
Stone look. A finer flake that reads as natural speckled stone. A softer, more refined look for alfrescos, showrooms and garages that double as living space.
Plain epoxy. A solid colour with no flake. Clean and simple, but it shows dust, tyre marks and scratches more readily, and can be slippery when wet without an additive.
How we lay a flake floor
Free measure and quote. We look at the slab, check for cracks and moisture, and bring flake samples so you can see them in your own light.
Grind and repair. The surface is diamond ground, and cracks and damaged concrete are repaired.
Base coat and flake. The epoxy base coat goes down and the flake is broadcast to full cover.
Clear coat. Loose flake is scraped back and a clear topcoat seals the floor.
Hand over. We let you know when you can walk on it and when you can park on it.
Afternoon light across a finished garage floorDecorative flake on a canal home balcony
Perth heat and hot tyre marks
In a Perth summer, tyres can come off the road hot enough to soften a thin coating, and as the car cools the coating can lift where the tyres sit. We prevent this with proper diamond grinding for adhesion, a full build of base coat and flake rather than a thin rolled coat, and a topcoat suited to vehicle traffic. Dark floors in garages that face the afternoon sun also get very warm, so we can talk you through lighter blends if that suits your home.
Flake blends
We lay the Q-Coat flake range from Synergy Building Supplies, with blends from soft whites and greys through to bold colour. The base coat under the flake changes the overall tone, so the same blend can read lighter or darker.
Base coat coloursWhiteCreamAsh GreyBluegumGraphite
Stone look finish
Prefer something finer? The Q-Coat Stone Flake range uses a smaller flake broadcast the same way, so the floor reads as natural speckled stone rather than flake. It hides dust and tyre marks well and suits garages, alfrescos, showrooms and larger commercial areas.
The samples shown are a guide to colour, texture and overall look, not an exact representation of your finished floor. Every installation is unique. Flake size and spread, the base coat colour, the topcoat sheen, lighting and the condition of the substrate all change how a blend looks in place, and screens display colour differently.
Use this range to shortlist your preferred finishes, then confirm your selection against a physical sample on site before work begins. Final appearance may vary from the images shown.
Looking after your floor
Sweep or blow out dust regularly. Grit is what wears any floor.
Mop with warm water and a mild cleaner. Avoid harsh solvents and acid based cleaners.
Wipe up oil and fuel promptly. The coating resists them, but nothing should sit for days.
Put a mat under kickstands and jack stands. Concentrated point loads can mark any coating.
Common questions
How much does a flake floor cost?
It depends on the size of the area and the condition of the slab. A floor that needs crack repairs costs more to prepare, but that preparation is the difference between a floor that lasts and one that peels. The measure and quote is free.
Is this an epoxy flake floor?
Yes. It is an epoxy base coat, a full layer of decorative flake and a clear topcoat over the top. We choose the primer and topcoat to suit your slab and how the area is used.
My garage floor is cracked. Can you still coat it?
Yes. Repairing cracked and damaged concrete is what we do every day, so it is repaired properly before any coating goes on. Read more about concrete crack repair.
How long does it take?
Most garages take two to three days on site, depending on the slab and the weather. We will tell you when you can walk on it and when you can park on it.
Will it be slippery?
Flake floors have a light texture. For alfrescos, patios and anywhere that gets wet, we can add a slip resistant additive to the topcoat.
Do I need to empty the garage?
Yes, the floor needs to be clear while we work. We will let you know how long to keep cars off it once it is done.