It’s the question everyone asks first, and the honest answer is that it depends on what’s found once the damaged concrete is opened up. Here’s what drives the cost of a concrete cancer repair in Perth, how to keep it down, and what a good quote should include.
The short answer
There’s no fair single price for concrete cancer repair, because two cracks that look the same from the outside can hide very different amounts of damage. What you can do is understand the factors that drive the price, and make sure any quote you get is based on a proper inspection.
What affects the cost
- How much damage there is. The area and depth of affected concrete, and how much of the steel has corroded. Sounding out the surface usually finds more than is visible.
- Whether steel needs replacing. If bars have lost too much section, they need replacing or supplementing to an engineer’s design, which adds to the scope.
- Access. A slab edge on the ground floor is very different from a balcony on a tall building or a car park soffit. Scaffold, swing stages or elevated work platforms are often a big part of the cost.
- Where it is. Balcony edges, soffits, columns and beams each need different methods and protection.
- Fixing the cause. If a failed membrane is feeding water into the slab, that needs fixing too, or the repair won’t last.
- Finishes. Tiles, render, paint and ceilings that have to be removed and reinstated.
- Occupied buildings. Working around residents or tenants, staging the works and meeting strata approval processes all affect the programme.
How to keep the cost down
- Act early. Small areas of spalling are far cheaper to repair than damage that’s been left to spread.
- Fix the water source. Repairs without fixing the leak behind them get paid for twice.
- Bundle the work. In strata buildings, doing all affected balconies or elevations in one scope shares access costs across the job.
- Get a scope based on an inspection. When quotes are built on the same defined scope, you can compare them like for like.
Why the cheapest quote can cost more
A low price often means patching the surface without breaking out behind the steel or treating it properly. It looks fine for a while, then fails, and the second repair costs more than doing it right the first time. See what a proper repair involves.
What a good quote should include
- What was inspected and how the extent was assessed
- The repair method, step by step
- How the steel will be treated, and when an engineer is involved
- How the cause of the damage will be fixed
- Access, protection of the area and making good of finishes
- A clear rate for any extra damage found once the concrete is opened up
Common questions
Why can’t you give me a price over the phone?
Because the cost depends on how far the damage goes beneath the surface. Photos help us give you an early idea, but a fair price needs an inspection.
Why do quotes include a rate for extra damage?
Concrete cancer is often more extensive than it looks. A clear rate for additional areas means there are no surprises if more is found once the concrete is opened up.
Is it cheaper to just patch it?
In the short term, yes. Over a few years, almost never. A patch that doesn’t treat the steel tends to fail and can make the corrosion around it worse.